LED oyster ceiling light
Description
LED Oyster Ceiling Light is made with high brightness SMD LEDs, SAA driver, with less degradation and 50,000 hours lifespan, replacing the 36-60W fluorescent ceiling light. It widely used in stair well, corridor, parking lots.
Feature
◆Adopt PMMA Opal diffuser and uniform illumination
◆Surface mounted installation and large hole of terminal block
◆Using high brightness SMD5730 led chips as light source
◆Adopt isolated SAA/CE approved driver
◆Available watt:12w/18w/20w
◆Meet SAA,C-tick and CE requirements
◆3 years warranty
Detail photos
![image.png](/Data/comledtech/upload/image/20180312/6365646907131617834852588.png)
Installation
1. Take off the cover from right to left.
![image.png](/Data/comledtech/upload/image/20180312/6365646915966623279311448.png)
2. Tack four plastic studs on the ceiling.
![image.png](/Data/comledtech/upload/image/20180312/6365646918646423534147816.png)
3. Connect the “L”, “N”, “E” wires to terminal block.
![image.png](/Data/comledtech/upload/image/20180312/6365646921044123672234544.png)
4. Put the cover back.
![image.png](/Data/comledtech/upload/image/20180312/6365646925193514438957258.png)
5. Turn on the power.
![image.png](/Data/comledtech/upload/image/20180312/6365646930287118899072216.png)